WWMetallizing Stainless Wire #2

Class: No #2
AWS: MIL-W-6712B Stainless Steel

C = 0.35 max
P = 0.02 max
S = 0.02 max
Mn = 0.35 max
Ni = 0.50 max
Cr = 13.0 max
Si = 0.50 max
Fe = Balance

---

Stainless Metallizing Wire #2 can be sprayed with most metalizing guns using any fuel gas. Use #2 wherever a hard coating is required, even where corrosion resistance is not necessary. It is high strength, high elongation and low shrink. Use on cylinder liners, pistons, valve stems, rams or crankshaft bearings. Parameters for spraying can be obtained from Spraying Instruction Manuals. Coatings may be machined or ground. Respiratory protection is recommended for spraying this material.