ERNiCrMo-8
Class: ERNiCrMo-8
AWS: A5.14
Conforms to Certification: AWS A5.14 | ASME SFA A5.14
Weld Process: GMAW & ASAW Welding Processes
| AWS Chemical Composition Requirements | |
| C = 0.03 max | Cu = 0.7 – 1.2 |
| Mn = 1.0 max | Ni = 47.0 – 52.0 |
| Fe = Remainder | Ti = 0.7 – 1.5 |
| P = 0.03 max | Cr = 23.0 – 26.0 |
| S = 0.03 | Mo = 5.0 – 7.0 |
| Si = 1.0 max | Other = 0.50 max |
Please Call For More Information and Available Sizes
Application
ERNiCrMo-8 is used for welding nickel – chromium-molybdenum base materials to itself, steel and other nickel base alloys, and for cladding steel with NI-CR-MO weld materials.
| Deposited Chemical Composition % (Typical) | ||
| C = 0.01 | Cr = 24.75 | Ni = 50.5 |
| Cu = 0.90 | Mo = 6.1 | Fe = Balance |
| Si = 0.70 | ||
| Deposited Chemical Composition % (AW) | |
| Tensile Strength | 91,000 psi |
| Elongation | 27% |
Deposited Charpy-V-Notch Impact Properties %
Not applicable
Recommended Welding Parameters for MIG and SAW Welding of Nickel Alloys |
||||
| Process | Diameter of Wire | Voltage (V) | Amperage (A) | Gas |
| MIG | .035 inches | 26 – 29 | 150 – 190 | 75 % Argon +25% Helium |
| .045 inches | 28 – 32 | 180 – 220 | 75 % Argon +25% Helium | |
| 1/16 inches | 29 – 33 | 200 – 250 | 75 % Argon +25% Helium | |
| SAW | 3/32 inches | 28 – 30 | 270 – 350 | Suitable Flux May Be Used. |
| 1/8 inches | 29 – 32 | 350 – 450 | Suitable Flux May Be Used. | |
| 5/32 inches | 30 – 33 | 400 – 550 | Suitable Flux May Be Used. | |
Note: Other shielding Gases may be used for Mig welding. Shielding gases are chosen taking Quality, cost, and Operability into consideration.
Note: Both agglomerated and fused fluxes can be used for submerged arc welding.
Note: The chemical composition of the flux mainly affects the chemistry of the weld metal and consequently its corrosion resistance and mechanical properties.